From Wikipedia, the free encyclopedia

Motorcyclists take a break from the road
Motorcyclists take a break from the road

A motorcycle or motorbike is a single-track, two-wheeled motor vehicle powered by an engine. Styles of motorcycles vary depending on the task for which they are designed, such as long distance travel, navigating congested urban traffic, cruising, sport and racing, or off-road conditions. Motorcycles are among the least expensive and most widespread forms of motorised transport in many parts of the world.


[edit] History

Main article: Motorcycle history
Replica of the Daimler-Maybach Reitwagen
Replica of the Daimler-Maybach Reitwagen
A 1913 Fabrique National in-line four with shaft drive from Belgium
A 1913 Fabrique National in-line four with shaft drive from Belgium
An historic 1941 Crocker
An historic 1941 Crocker
A 2002 Suzuki FXR150

The inspiration for the earliest dirt bike, and arguably the first motorcycle, was designed and built by the German inventors Gottlieb Daimler and Wilhelm Maybach in Bad Cannstatt (since 1905 a city district of Stuttgart) in 1885.[1] The first petroleum-powered vehicle, it was essentially a motorized bicycle, although the inventors called their invention the Reitwagen ("riding car").

However, if one counts two wheels with steam propulsion as being a motorcycle, then the first one may have been American. One such machine was demonstrated at fairs and circuses in the eastern U.S. in 1867, built by Sylvester Howard Roper of Roxbury, Massachusetts.[2]

In 1894, Hildebrand & Wolfmüller became the first motorcycle available for purchase.[3] In the early period of motorcycle history, many producers of bicycles adapted their designs to accommodate the new internal combustion engine. As the engines became more powerful, and designs outgrew the bicycle origins, the number of motorcycle producers increased.

Until the First World War, the largest motorcycle manufacturer in the world was Indian, producing over 20,000 bikes per year. By 1920, this honor went to Harley-Davidson, with their motorcycles being sold by dealers in 67 countries, until 1928 when DKW took over as the largest manufacturer.

After the Second World War, the BSA Group became the largest producer of motorcycles in the world, producing up to 75,000 bikes a year in the 1950s. The German company NSU Motorenwerke AG held the position of largest manufacturer from 1955 until the 1970s.

From the 1960s through the 1990s, small two-stroke motorcycles were popular worldwide, partly as a result of East German Walter Kaaden's engine work in the 1950s.[4]

Today, the Japanese manufacturers, Honda, Kawasaki, Suzuki, and Yamaha dominate the motorcycle industry, although Harley-Davidson still maintains a high degree of popularity in the United States. Recent years have also seen a resurgence in the popularity of several other brands sold in the U.S. market, including BMW, Triumph and Ducati.

In November 2006, the Dutch company E.V.A. Products BV Holland announced that its diesel-powered motorcycle, the Track T-800CDI, achieved production status.[5] The Track T-800CDI uses a 800cc three-cylinder Daimler Chrysler diesel engine. However, other manufacturers, including Royal Enfield, had been producing diesel-powered bikes since at least the 1980's.[6]

[edit] Technical aspects

[edit] Construction

A 1966 British motorbike - the 250 cc Ariel Leader used a pressed-steel frame
A 1966 British motorbike -
the 250 cc Ariel Leader used a pressed-steel frame

The construction of modern motorcycles has mostly standardized on the following key components.


The chassis (or frame) of a motorcycle is typically made from welded aluminium or steel (or alloy) struts, with the rear suspension being an integral component in the design. Carbon-fiber and titanium are used in a few very expensive custom frames.

Some motorcycles include the engine as a load-bearing (or stressed) member; this has been used all through bike history but is now becoming more common.

Oil-in-Frame (OIF) chassis, where the lubricating oil is stored in the frame of the motorcycle, was used for Vincent motorcycles of the fifties, and for a while during the 1970s on some NVT British motorcycles. It was widely unpopular and generally regarded as a bad idea at the time. Today it is a widely used idea on "thumpers" (single-cylinder four-strokes) that usually have a dry-sump lubrication requiring an external oil tank. It has since gained some cache in modern (2006) custom bike world too because of the space saving it can afford and the reference to an earlier era. [1]. Buell motorcycles employ a similar design - the oil is held in the swingarm, while the fuel is held in the frame.

Front fork
Main article: Motorcycle fork

A motorcycle fork is the portion of a motorcycle that holds the front wheel and allows one to steer. For handling, the front fork is the most critical part of a motorcycle. The combination of rake and trail determines how stable the motorcycle is.

A fork generally consists of two fork tubes (sometimes also referred to as forks), which hold the front wheel axle, and a triple tree, which connects the fork tubes and the handlebars to the frame with a pivot that allows for steering.

Main article: Motorcycle engine

Almost all commercially available motorcycles are driven by conventional gasoline internal combustion engines, but some small scooter-type models use an electric motor, and a very small number of diesel models exist (e.g., the USMC M1030 M1 version of the Kawasaki KLR650 and the Dutch-produced Track T-800CDI).

The displacement is defined as the total volume of air/fuel mixture an engine can draw in during one complete engine cycle. In a piston engine, this is the volume that is swept as the pistons are moved from top dead centre to bottom dead centre. To the layperson this is the "size" of the engine. Motorcycle engines range from less than 50 cc (cubic centimetres), commonly found in many small scooters, to 5735cc, a Chevrolet V8 engine, currently used by Boss Hoss in its cruiser style motorcycle.

A V-twin engine
A V-twin engine

Motorcycles have mostly, but not exclusively, been produced with one to four cylinders, and designers have tried virtually every imaginable layout. The most common engine configurations today are the vertical single and twin, the V-twin, the opposed twin (or boxer), and the in-line triple and in-line four. A number of others designs have reached mass production, including the V-4, the flat 6-cylinder, the flat 4-cylinder, the in-line 6-cylinder, and the Wankel engine. Exotic engines, such as a radial piston engine, sometimes appear in custom built motorcycles.

Engines with more cylinders provide more power for the same displacement, and feel smoother to ride. Engines with fewer cylinders are cheaper, lighter, and easier to maintain. Liquid-cooled motorcycles have a radiator (exactly like the radiator on a car) which is the primary way their heat is dispersed. Coolant or oil is constantly circulated between this radiator and the cylinder when the engine is running. Air-cooled motorcycles rely on air blowing past fins on the engine case to disperse heat. Liquid cooled motorcycles have the potential for greater power at a given displacement, tighter tolerances, and longer operating life, whereas air cooled motorcycles are potentially cheaper to purchase, less mechanically complex and lighter weight.

An air cooled engine contracts and expands with its wider temperature range, requiring looser tolerances, and giving shorter engine life. The temperature range of an air cooled two stroke is even more extreme, and component life even shorter than in an air cooled four stroke.

As applied to motorcycles, two-stroke engines have some advantages over equivalent four-strokes: they are lighter, mechanically much simpler, and produce more power when operating at their best. But four-stroke engines are cleaner, more reliable, and deliver power over a much broader range of engine speeds. In developed countries, two-stroke road-bikes are rare, because - in addition to the reasons above - modifying them to meet contemporary emissions standards is prohibitively expensive. Almost all modern two-strokes are single-cylinder, liquid-cooled, and under 600 cc.

The transmission on this 1921 ABC motorcycle is located behind the engine and shifts by a long hand-operated lever on its right side.
The transmission on this 1921 ABC motorcycle is located behind the engine and shifts by a long hand-operated lever on its right side.

Modern motorcycles normally have five or six forward gears. Only the largest touring motorcycles and a few models that are routinely used with a sidecar or converted to tricycle configuration are fitted with a reverse gear. On a few, including the Honda Gold Wing and BMW K1200LT, it is not really a reverse gear, but a feature of the starter motor which when reversed, performs the same function. The weight of these motorcycles, in excess of 360 kg (800 lbs), means that they cannot effectively be pushed backwards in some situations by a seated rider.

Older motorcycles had various kinds of shifting arrangements. A common version before World War II was a hand operated shift lever that rose from the transmission behind the engine up to beside the fuel tank on its left or right side. Later, some motorcycles, especially British, used foot shift levers that were located on the right side of the transmission. Today, shifting on the world's motorcycles has been standardized to the left-side foot-operated shift lever.

The clutch is typically an arrangement of plates stacked in alternating fashion, one geared on the inside to the engine and the next geared on the outside to the transmission input shaft. Whether wet (rotating in engine oil) or dry, the plates are squeezed together by a spring, causing friction build up between the plates until they rotate as a single unit, driving the transmission directly. A lever on the handlebar exploits mechanical advantage through a cable or hydraulic arrangement to release the clutch spring, allowing the engine to freewheel with respect to the transmission.

A typical 5-gear, foot-shift transmission on an HD Sportster
A typical 5-gear, foot-shift transmission on an HD Sportster

The most commonly used transmission is a sequential gearbox. From neutral, either first or second gear can be selected, but higher gears may only be accessed in order - it is not possible to shift from second gear to fourth gear without shifting through third gear. A five-speed of this configuration is commonly said to be "one down, four up," and a six-speed is said to be "one down, five up" due to the placement of the gears with relation to neutral. Neutral is considered to be "half a click" from first and second gears, so shifting directly between the two gears is made in one firm movement. Neutral is not placed "below" first gear to prevent the rider accidentally selecting neutral while attempting to downshift to first gear, possibly leading to an accident.

Scooters normally have a continuously variable transmission (CVT). The CVT is a type of automatic transmission (also occasionally used in cars) that can change the "gear ratio" (gears are not generally involved) to any one of the possible undetermined settings within a given range. The CVT is not constrained to a small number of gear ratios, such as the 4 to 6 forward ratios in typical automotive transmissions. CVTs are ideally suited to 2-wheeled vehicles because of the lack of shift shock. A conventional automatic transmission might shift shock at an unexpected moment and upset the vehicle. The CVT transmission also offers maximum power efficiency, an important factor for the engines with less than 100cc capacity typically used in scooters.

Final drive
A shaft final drive is housed within a rear swingarm of a BMW R1200GS
A shaft final drive is housed within a rear swingarm of a BMW R1200GS

Power transfer from the gearbox to the rear wheel is typically accomplished with a chain, which requires both lubrication and adjustment for elongation (stretch) that occurs through wear. The lubricant is subject to being thrown off the fast-moving chain and results in grime and dirt build up. Chains do deteriorate, and excessive wear on the front and rear sprockets can be dangerous. Many manufacturers offer cruiser models with final drive options of a belt or a shaft. A belt drive is still subject to stretch, but operates very quietly, cleanly, and efficiently. However, belt drives are limited in the amount of power they can transmit. A toothed belt is frequently used. A shaft drive is usually completely enclosed; the visual cue is a tube extending from the rear of the transmission to a bell housing on the rear wheel. Inside the bell housing a bevelled gear on the shaft mates with another on the wheel mount. This arrangement is superior in terms of noise and cleanliness, and is virtually maintenance free. However, the additional gearsets are a source of power loss and add weight.


The wheel rims are usually steel or aluminium (generally with steel spokes and an aluminium hub) or mag-type cast or machined aluminium. At one time, motorcycles all used spoke wheels built up from separate components (see wheelbuilding), but, except for dirtbikes, one-piece wheels are more common now. Performance racing motorcycles often use carbon-fibre wheels, but the expense of these wheels is prohibitively high for general usage.

A wire wheel and pneumatic motorcycle tire on a Ural
A wire wheel and pneumatic motorcycle tire on a Ural

Wire wheels, a.k.a. "laced wheels," have a central hub connected to the rim of the wheel via spokes made of wire. These spokes are generally quite solid and will not easily bend as would typical wire cord. Nevertheless, they mechanically function as wires under tension, holding the rim true and providing strength to the wheel. Cast magnesium disks, produced by one-step hot forging from magnesium alloys ZK60 and MA-14, are also used for many motorcycle wheels.

Tyres (also, Tires)

Motorcycles mainly use pneumatic tyres. However, in some cases where punctures are common (some enduros), the tyres are filled with a "mousse" which is unpunctureable. Both types of tyre come in many configurations. The most important characteristic of any tyre is the contact patch. That is the small area that is in contact with the road surface while riding. There are tyres designed for dirtbikes, touring, sport and cruiser bikes.

Dirtbike tyres have knobbly, deep treads for maximum grip on loose dirt, mud, or gravel; such tyres tend to be less stable on paved surfaces. Touring tyres are usually made of harder rubber for greater durability. They may last longer, but they tend to provide less outright grip than sports tyres at optimal operating temperatures. The payoff is that touring tyres typically offer more grip at lower temperatures, meaning they can be more suitable for riding in cold or winter conditions whereas a sport tyre may never reach the optimal operating temperature.

Sport/performance tyres provide amazing grip but may last 1,000 miles (1,600 km) or less. Cruiser and "sport touring" tyres try to find the best compromise between grip and durability. There is also a type of tyre developed specifically for racing. These tyres offer the highest of levels of grip for cornering. Due to the high temperatures at which these tyres typically operate, use on the street is unsafe because the tyres will typically not reach optimum temperature before a rider arrives, thus providing almost no grip en route. In racing situations, racing tyres would normally be brought up to temperature in advance by the use of tyre warmers.

Front disk brakes with an ABS sensor ring on a BMW R1200RT
Front disk brakes with an ABS sensor ring on a BMW R1200RT

There are generally two independent brakes on a motorcycle, one set on the front wheel and one on the rear. However, some models have "linked brakes" whereby both can be applied at the same time using only one control.

Front brakes are generally much more effective than rear brakes: roughly two thirds of stopping power comes from the front brake—mainly as a result of weight transfer being much more pronounced compared to longer or lower vehicles, due to the motorcycle's relatively short wheelbase. Brakes can either be drum or disc based, with disc brakes being more common on large, modern or more expensive motorcycles for their far superior stopping power, particularly in wet conditions. There are many brake-performance-enhancing aftermarket parts available for most motorcycles, including brake pads of varying compounds and steel-braided brake lines.

In 1981, BMW introduced an antilock braking system (ABS) on a motorcycle. Other manufacturers have since also adopted this technology, although Harley Davidson only offers it on some police motorcycles and not on civilian motorcycles. ABS is normally found on motorcycles of 500cc or greater engine capacity, although it is available on motor scooters down to 49cc.

Plunger design suspensions were superseded by the swinging arm
Plunger design suspensions were superseded by the swinging arm

Modern designs have the two wheels of a motorcycle connected to the chassis by a suspension arrangement, however 'chopper' style motorcycles often elect to forgo rear suspension, using a rigid frame.

The front suspension is usually built into the front fork and may consist of telescoping tubes called fork tubes which contain the suspension inside or some multibar linkage that incorporate the suspension externally.

The rear suspension supports the swingarm, which is attached via the swingarm pivot bolt to the frame and holds the axle of the rear wheel. The rear suspension can consist of several shock arrangements:

  • Dual shocks, which are placed at the far ends of the swingarm
  • Traditional monoshock, which is placed at the front of the swingarm, above the swingarm pivot bolt
  • Softail style suspension, where the shock absorbers are mounted horizontally in front of the swingarm, below the swingarm pivot bolt and operate in extension.

With dirtbikes excluded, almost all motorcycles have a speedometer, an odometer and a tachometer. Fuel gauges are becoming more common, but traditionally a reserve tank arrangement is used with a petcock (petrol tap) on the side of the motorcycle allowing the rider to switch to a reserve fuel supply when the main fuel supply is exhausted. There is not actually a separate reserve tank: The intake for the petcock has two pipes, one extending higher into the fuel tank than the other. When fuel no longer covers the longer pipe the engine will lose power/splutter and the rider switches the petcock to the "reserve" setting, which accesses the shorter pipe. Riders whose bikes lack a fuel gauge (most machines prior to the past few years) usually learn how many miles/kilometres they can go with a full tank of fuel, and then use a trip meter if available to judge when they must refill the tank.

[edit] Fuel economy

Motorcycle fuel economy benefits from the relatively small mass of the vehicle, compared to its passengers and to other motor vehicles, and subsequent small engine displacement. However, poor aerodynamics of exposed passengers and engines designed for goals other than fuel economy can work to reduce these benefits.

Fuel economy varies greatly with engine displacement from a low of 29 mpg U.S. (8.1 L/100km) reported by a Honda VTR1000F rider[7] to 107 mpg U.S. (2.2 L/100km) reported for the Verucci Nitro 50cc Scooter[8]. A specially designed Matzu Matsuzawa Honda XL125 achieved 470 mpg U.S. (0.5 L/100km) "on real highways - in real conditions."[9]

[edit] Dynamics

Motorcycles must be leaned in order to turn. This lean can be induced by a method known as countersteering, in which the rider turns the handlebars in the direction opposite of the desired direction of turn. In other words, press forward on the handgrip in the desired direction — press right to go right, press left to go left. This concept is counter-intuitive and often very confusing to novices — and even to many experienced motorcyclists.

The primary effect of countersteering is to shift the front tyre contact patch such that a lean is initiated. Other methods allegedly used for turning a motorcycle, such as shifting weight to the side or the pegs, only help leaning the body of the motorcycle towards a direction; thus turning the front wheel in the opposite direction due to the preservation of angular momentum, and eventually resulting in countersteering.

Short wheelbase motorcycles, such as sport bikes, can generate enough torque at the rear wheel and enough stopping force at the front wheel in order to flip longitudinally. These actions, especially if performed on purpose, are known as wheelies and stoppies respectively.

[edit] Additions

Various additions may be attached to a motorcycle or come as an integral part of a motorcycle from the factory.

A full fairing on a Honda Gold Wing
A full fairing on a Honda Gold Wing

A plastic or fibreglass shell, known as a "fairing", is placed over the frame on some models to shield the rider from the wind, aid in aerodynamics and protect engine components in an accident and also from theft. Drag is the major factor that limits motorcycle speed, as it increases at the square of the velocity, with the resultant required power increasing with the cube of velocity. As can be seen from the streamlined appearance of new performance motorcycles, there is much aerodynamic technology included in the design. Unfortunately, since the 1958 FIM ban on "dustbin" fairings no major manufacturer has been bold enough to overcome the effect of the turbulence caused by the spinning front wheel, which prevents the motorcycle from cutting a clean path through the air. The "dustbin" fairing can improve aerodynamic performance without unacceptably compromising the rider's ability to control the machine, although with a weight penalty.

An example of a fairing on a Honda CBR1000F
An example of a fairing on a Honda CBR1000F

In the absence of a fairing or windshield, a phenomenon known as the windsock effect occurs at speeds above 100 km/h, where the rider becomes a major source of drag and is pushed back from the handlebars, tiring the rider. However, these motorcycles still effectively push their way through the atmosphere with brute force. A cabin cycle, which has a hull that wraps around the basic cycle frame, solved the problem of aerodynamics by isolating driver from outside air.

Modern fairings on touring and sport-touring motorcycles dramatically improve a rider's comfort and attention on long rides by reducing the effect of the wind and rain on the body. They also help keep a rider warm in cold weather, reducing hypothermia. Heated hand grips, and even heated seats, also improve rider comfort in cold weather. Motorcycles from a number of manufacturers now have electric windshields, which raise and lower the windshield with the push of a button to the optimum height for conditions.

Heated hand grips/seats

As motorcycles lack climate control or proper protection from the wind, some manufacturers offer heated seats or hand grips to relieve the discomfort of wind chill during night riding or the colder months. They can also be added on as after market accessories and are powered by the bikes battery.

Luggage rack

A common addition to many bikes is an attachment onto which bags or other luggage can be fastened. This removes the need for rider backpacks and is generally a more secure and safe way to add carrying capacity to a motorcycle.

Vespa scooter with sidecar
Vespa scooter with sidecar
Main article: Sidecar

A sidecar is a one-wheeled device attached to the side of a motorcycle, producing a three-wheeled vehicle. Early sidecars were intended to be removable devices that could be detached from the motorcycle. Sidecars gradually superseded forecars and trailers. The forecar comprised a two-wheeled attachment attached to the front of the motorcycle; the trailer was just that, leaving the passenger to be hauled along behind the vehicle. In neither case could rider and passenger converse easily – this may be why early sidecars were often called 'sociable' attachments.

Trailer hitch

A trailer hitch or tow hitch is a device mounted on a motorcycle that enables it to tow a motorcycle trailer, usually in order to haul additional gear.

Main article: Trunk (motorcycle)

A motorcycle trunk is a storage compartment in the vicinity of the seat, other than panniers or saddlebags. A trunk mounted above and to the rear of the seat is also called a top box.

[edit] Social aspects

Main article: Motorcycling

[edit] Subcultures

A motorcycle rally in Ontario
A motorcycle rally in Ontario

Around the world, motorcycles have historically been associated with subcultures. Some of these subcultures have been loose-knit social groups such as the cafe racers of 1950s Britain, and the Mods and Rockers of the 1960s. A few are believed to be criminal gangs.

Social motorcyclist organizations are popular and are sometimes organised geographically, focus on individual makes, or even specific models. Example motorcycle clubs include: American Motorcyclist Association, Harley Owners Group, Gold Wing Road Riders (GWRRA), and BMW MOA.

Many motorcycle organizations raise money for charities through organized events and rides. Some organizations hold large international rallies in different parts of the world that are attended by many thousands of riders.

[edit] Mobility

While the reasons for people choosing to ride motorcycles are many and varied, those reasons are increasingly practical, with riders opting for a powered two-wheeler as a cost-efficient alternative to infrequent and expensive public transport systems, or as a means of avoiding or reducing the effects of urban congestion.[10] In places where it is permitted, lane splitting, also known as filtering, allows motorcycles to use the space between vehicles to continue moving through stationary or slow traffic.[11]

In England, motorcycles are exempt from the £8 per day London congestion charge other vehicles have to pay to enter the city during the day. Motorcycles are also exempt from toll bridge charges at some crossings, such as the Severn Bridge and Dartford Crossing. In many countries, solo motorcycles are allowed to use high-occupancy vehicle lanes and some cities, such as Bristol, allow motorcycles to use bus lanes and provide dedicated free parking.

In many cultures, motorcycles are the primary means of motorized transport. According to the Taiwanese government, for example, "the number of automobiles per ten thousands population is around 2,500, and the number of motorcycles is about 5,000."[12]

[edit] Safety

Main article: Motorcycle Safety

Motorcycles have a far higher rate of crippling and fatal accidents per unit distance than automobiles. According to the U. S. Highway Safety Authority, in 2004 15.0 cars out of 100,000 ended up in fatal crashes while the rate for motorcycles is 69.3 per 100,000. The picture is grimmer when distance travelled are taken into account: in 2004 in the U.S., there was 0.4 fatalities per million miles compared to 0.012 passenger car fatalities per million miles (a ratio of 33 to 1).

Helmets, full- and open-face
Helmets, full- and open-face
An MSF rider course for novices
An MSF rider course for novices

In fact, a common emergency room term for motorcycle is "donor cycle," which refers to fatal crashes where the motorcyclist's organs are donated for use in transplants.

The two major causes of motorcycle accidents in the United States, i.e., (1) motorists pulling out or turning in front of motorcyclists and violating their rights-of-way and (2) motorcyclists running wide in turns and crashing, are made more likely when motorcyclists mix drinking with riding.[13] Motorcyclists can do much to anticipate and avoid these crashes by getting proper training, increasing their conspicuity to other traffic, and separating alcohol and riding.

The United Kingdom has a number of organisations which are dedicated to improving motorcycle safety by providing advanced rider training over and above what is necessary to pass the basic motorcycle test. These include the Institute of Advanced Motorists (IAM) and the Royal Society for the Prevention of Accidents (RoSPA). Along with increased personal safety, riders with these advanced qualifications often benefit from reduced insurance costs.

Motorcycle Safety Education is offered throughout the United States by a number of organizations ranging from state agencies to non-profit organizations to corporations. The courses, designed by the Motorcycle Safety Foundation (MSF), include a Basic Rider Course, an Intermediate Rider Course and an Advanced Rider Course.

In some Australian jurisdictions, such as New South Wales,[2] the Australian Capital Territory [3] and the Northern Territory,[14] it is compulsory to undertake a rider training course before being issued a Learners License.

[edit] Types of motorcycles

Main article: Types of motorcycle

There are two major types of motorcycle, street and off-road. Within these types, there are many different types of motorcycles for many different purposes.

  • Choppers: Highly customized motorcycles based on a cruiser-style frame with long rake (longer front forks) and wild paint jobs. These are created more for show than dependability and ridability.
Harley-Davidson Softail Heritage Classic. A typical "cruiser" design
Harley-Davidson Softail Heritage Classic. A typical "cruiser" design
Kawasaki ZX-7RR sport bike
Kawasaki ZX-7RR sport bike
An Italian 125cc Cagiva Planet. A standard motorbike
An Italian 125cc Cagiva Planet.
A standard motorbike
Mika Kallio's KTM125 racing motorcycle
Mika Kallio's KTM125 racing motorcycle
The popular Kawasaki KLR650 dual-purpose motorcycle
The popular Kawasaki KLR650 dual-purpose motorcycle
  • Cruisers: A range of small to large motorcycles designed for comfort and looks with a relaxed upright seating position. They are notable for their heavy use of chrome and are often highly customized.
  • Electric motorcycles: Nearly silent, zero-emission electric motor-driven vehicles. Though electric motorcycles are emission free during operation, producing the electricity that charges the batteries in them can be a cause of pollution. Operating range and top speed suffer because of limitations of battery technology.
  • Mini bikes: Very small bikes designed to be simple and fun for children. Generally they have no clutch or shifting to simplify operation. Also known as Mini Motos. Not street-legal in most countries and jurisdictions. May be used for racing by all age levels.
  • Mopeds: Small, light, inexpensive, efficient rides for getting around town. Usually started by pedaling (motorcycle + pedals = moped).
  • Scooters: Motorbikes with a step-through frame and generally smaller wheels than those of a traditional motorcycle. Can be ridden without straddling any part of the bike. Available in sport, commuter, and touring models.
  • Sport bikes: Fast, light, sleek motorcycles designed for maximum performance, for racing or spirited road riding. They are distinguishable by their full fairings and the rider's tipped-forward seating position. They are also called "race replicas" because of their connection to the racing category for production motorcycles known as Superbike racing. The power to weight ratio of the 900cc+ models typically matches or exceeds one bhp of power for every one Kg of mass.
    • Naked bikes/Standard/Street bikes: Naked bikes have a riding position midway between the forward position of a sports bike and the reclined position of a cruiser. Unlike touring bikes, naked bikes often have little or no fairing (hence the title). Luggage capabilities are often an optional extra. Naked bikes are popular for commuting and other city riding as the upright riding position gives greater visibility in heavy traffic (both for the rider and to other road users) and are more comfortable than the hunched over sport bikes.
    • Racing bikes: Motorcycles designed for circuit or road racing, including mass-production motorcycles modified for motorcycle racing or sport riding.
    • Street customs: Highly customised motorcycles with wild paint jobs also built for show, but constructed from a sport bike frame instead of a cruiser-style frame.
  • Touring motorcycles: Touring bikes are designed for rider and passenger comfort, luggage carrying capacity, and reliability. Cruisers, sport bikes and some dual-sports can also be used as touring bikes with the addition of aftermarket luggage and seats.
    • Sport touring motorcycles: Sport-tourers are factory-built hybrids of a sport bike and a touring motorcycle, for those who desire the qualities of both.
  • Motocross bikes: Motorcycles designed for racing over closed circuits, often with jumps, over varied terrain of gravel/mud/sand.
  • Supermotos: Beginning in the mid-1990s, motocross machines fitted with street wheels and tyres similar to those used on Sport bikes began to appear. These are known as "Supermotards", and riders of these machines compete in specially organized rallies and races.
  • Trials motorcycles: Motorcycles made as light as possible, with no seat, in order to provide maximum freedom of body positioning for use in observed trials competition.
  • Dual-sports: Road-legal machines offering a compromise in highway and off-road performance, durability and comfort. Since the requirements are often conflicting, the manufacturer has to choose one or the other, resulting in a great variety of bikes in this category.
  • Enduros: Road-legal versions of a motocross machine, i.e., featuring high ground clearance and copious suspension with minimal creature comforts. Highly unsuitable for long distance road travel. The features that differ from the motocross versions are the silencers, the flywheel weights and the presence of features necessary for highway use.

[edit] Legal definitions and restrictions

A motorcycle is broadly defined by law in some countries for the purposes of registration, taxation or licensing riders as a two-wheel motor vehicle "fit to drive." Other countries distinguish between mopeds and other small bikes and the larger, more powerful vehicles.

In the UK, the rules on which motorcycle may be ridden by whom are complex.[15] A "moped", which can be ridden at age 16, has a maximum design speed not exceeding 50 km/h (30 mph) and engine capacity no greater than 50 cc. A "learner motorcycle", which can be ridden from age 17, has an engine up to 125 cc with a power output not exceeding 11 kW.

A scooter and a motorcycle
A scooter and a motorcycle

A "large motorcycle", which can only be ridden by a person age 21 or older with two years experience on a learner motorcycle, has a power output of at least 35 kW. Otherwise, riders are restricted to riding motorcycles with a power output of not more than 25 kW for two years after passing their initial motorcycle test.

For riders in the UK over age 21 there is a direct access route to gaining a licence to ride a large motorcycle. This allows somebody with no motorcycle experience to train and pass a test in around five days. Nevertheless, all motorcycle riders in the UK must first take a one-day compulsory basic training (CBT) course, regardless of which class of motorcycle they intend to ride.

In New Zealand, "learner" and "restricted" motorcycles need only have a 250 cc engine capacity. This distinction draws some criticism, as it allows 15-year-old learner riders to operate bikes capable of reaching speeds in excess of 250 km/h.

The laws of some countries allow anyone with a car licence to legally ride mopeds not exceeding 50 cc in capacity, meaning that they do not need to show any competency in handling such a vehicle.

The laws and regulations for legal moped usage in the U.S. vary by state. The specifics of the motorcycle and moped laws in the U.S. can be obtain from each individual state's Department of Motor Vehicles Websites.

[edit] See also

[edit] References

  1. ^ "The Past - 1800s: First motorcycle," The History and Future of Motorcycles and motorcycling - From 1885 to the Future, Total Motorcycle Website.
  2. ^ "The Past - 1800s: First motorcycle," supra.
  3. ^ "Brief History of the Marque: Hildebrand & Wolfmuller," Hildebrand & Wolfmuller Motorad, European Motorcycle Universe, (2005-2007
  4. ^ "The History of Motocross, Part Two: Motocross goes International, 1947 through 1965," by Ed Youngblood, Motorcycle Hall of Fame Museum (2005).
  5. ^ "The first commercially-available diesel motorcycle," (November 20, 2006).
  6. ^ See, e.g.,"Diesel motorbikes," Journey to Forever.
  7. ^ Total Motorcycle Fuel Economy Guide. Retrieved on 2006-08-14.
  8. ^ VERUCCI GAS SCOOTERS. Retrieved on 2006-08-15.
  9. ^ The Craig Vetter Fuel Economy Contests - 1980 through 1985. Retrieved on 2006-08-15.
  10. ^ "Rider training in Europe The Views and the Needs of the Rider," The Federation of European Motorcyclists, Bob Tomlins - FEM Assistant General Secretary and Project Co-ordinator (September 1997).
  11. ^ WhyBike? (2006-03-06). All the info you need on lanesharing (lanesplitting).
  12. ^ Sustainable Development Indicators for Taiwan. Retrieved on 2006-08-14.
  13. ^ "The Hurt Report: Motorcycle Accident Cause Factors and Identification of Countermeasures," Volume 1: Technical Report, Hurt, H.H., Ouellet, J.V. and Thom, D.R., Traffic Safety Center, University of Southern California, Los Angeles, California 90007, Contract No. DOT HS-5-01160, January 1981 (Final Report).
  14. ^ ACT Learner Motorcycle Licence
  15. ^ Mopeds and Motorcycles: Routes to your licence. UK Department for Transport. Retrieved on 2007-03-03.

[edit] External links

Wikimedia Commons has media related to: